gladiator pixel led software
Share This Post, Help Others

Glediator LED Software enables the import and use of an effect that has been created using the Glediator software into xLights.Glediator is a 3rd party application that can generate an unlimited number of effects. Once an effect has been created, it must be saved as a. GLED file.

The free download of Glediator LED software FOR Matrix control is important information accompanied by photos and high-definition images obtained from all the websites in the world. Download this image for free in HD resolution with the “download button” option below. If you cannot find the exact resolution you are looking for, choose a native resolution or higher.

Don’t forget to bookmark Glediator LED matrix control software free led download using Ctrl + D (PC) or Command + D (macOS). If you are using a mobile phone, you could also use a menu drawer from the browser. Whether it’s Windows, Mac, iOs, or Android, you will be able to download the images using the download button.

Glediator LED Software Download For LED Matrix Control

Place Glediator effect in on timing cells that you wish to have the effect on a model. Click on the filename prompt and browse and select the gladiator file.

Glediator LED Software Download

You must configure Glediator LED to the X,Y dimensions of your model you wish to add effects to. 

ledpixeltm

You may also use Jinx! to create effects. It will create a ‘.out’ file which can be used with this effect. There is no need to rename the saved output file to .gled to use with the Glediator effect. Glediator LED effect is now supported. GLED and. OUT files.

Unofficial port (reverse engineering) of the Glediator LED Matrix controlling software, with minor enhancements such that:

  • The Serial Port connection works on all platforms.
  • WiFi connecting to an ESP32 is quite straightforward, requiring only a target IP address from the software.

How to use (via. WiFi)

  1. Install the JAVA JRE onto your computer: From Here
  2. Load the Glediator3_TPM2_Net example sketch onto the ESP32 with the SSID and WiFi configured.
  3. Make a note of the IP address assigned to the ESP32
  4. Execute java -jar Glediator3-binary-XXXX.jar (from the releases directory)
  5. Set the Matrix Size in the Software Options, then go into ‘Output’ and configure the correct destination IP
  6. Then click “Open Socket” to get things started. Glediator3 will start transmitting to the ESP32.
Glediator LED Software Download For LED Matrix Control

How to use (via. Serial Port – Slow)

  1. Install the JAVA JRE onto your computer: https://jdk.java.net/14/
  2. Execute java -jar Glediator3-binary-XXXX.jar (from the releases directory)
  3. Connect to your Matrix_Panel via. Serial Port once having loaded “Glediator3_TPM2_MatrixPanel” example onto it.
  4. Then click ‘Serial Open’ to get things started.

Note: The serial port will differ depending on your computer and what your Arduino / ESP32 is connected to.

Similar Posts

3 Comments

Leave a Reply

Your email address will not be published.