In this article, I am going to talk to you about How To Make and Install Pixel LED in Flooring Tails.
If you also want to Install Pixel LED in Tails then how can you do it? Which device are you going to need to make this project? I am going to tell you all this in today’s article. Today I am going to talk to you about everything. Which power supply are you going to need in this? How do you have to do the wiring for this project?
I am talking to you about all the details. So read this article completely.
How To Install Pixel LED in Flooring Tiles
In this project, you are going to need Power Supply, Controller, and the Casing Pipes that come with Light Fittings.
You get to see something like this. You can see it in the photo below.
You have to input Pixel LED by making a hole in it. But before doing all this, you have to measure properly. Then you can put well. If you measure properly, you can see good effects. Therefore, the Pixel LED has to be input with the same difference, You can watch the photo below. You have to do something.
Pixel LED Install Flooring Tails
First of all, you have to cut the tails like this.
I have cut the tails in this way. You can make any kind of design you want. I made something like this. You have to do this very carefully. Then in this, you have to input Pixel LED in a simple way. You can make any kind of design you like. You have to make it like this.
How To Make Program
In this project, I have used SP107E Controller. I have used a 20A power supply in this project. If you talk about Controller then you can use any Controller. In this, you can also use a controller with Wi-Fi. With the help of which you can also operate with the help of mobile. You have to input Pixel LED in Flooring Tails like this.
You can see in the photo above how good you get to see.
You get to see a lot of good effects. You get to see this very well, And the controller also reacts according to the music. These are very good things.
Friends, whatever you get to see the square above, you have used a trap, that is, 50-50 LEDs are used in it, Total of 400 LED Bulbs have been used in this Project. You are going to see a lot of effects in this.
You can also operate with the help of a mobile. You can make this with very simple dates.
Wiring
In this project, I have used a 20A power supply. This 20A power supply can operate 400 Pixel LED Bulb very easily. In this, you have to do very simple wiring. You have to first connect the wire of the data with the data, the positive and negative wire with it. You only have to do this wiring. And you don’t have to do anything.
You are going to see a lot of good effects in this.
You can take this project very well in Night in USe.
In this, you are going to see many different effects.
If you have not understood anything in this article, then you can also watch the YouTube video on Smart India channel.
The source is in Hindi: HERE
