Today in this article I am going to talk to you about How to Make Pixel LED Gate step by step?, After all, what things are you going to need to make this project.
What else do you have to use in making this project? Which power supply do you have to use? How to do programming. If you also want to make Pixel LED Gate in this way, then read this article completely today. you will understand everything very well.
How to Make Pixel LED Gate?
Which part are you going to need first? What do you want to use first? We will know this first.
You’re going to need Polly Shit first. You are going to get to see something like this. You can see it in the photo below.
You can see it in the photo above. I have used some such Polly Shit, And I have done some such holes in it. In this, I have made holes by taking correct measurements.
Its special thing is that the type of design you want to make in it, in the same way, you have to make holes in it. All the holes are to be kept in a single line.
And talk about the specialty of this Polly Shit, then you get to see very flexible, With its help, you can make a very good gate.
How To use Polly Shit:
You can see it in the photo above. In it, you get to see a height of 20 feet. In this, you get to see the width of 12 feet. There is a seat that is four feet and in this, you get to see the width of 8 feet. Polly shit is going to be used a lot in this project, and about 35 to 40 nets, this project is going to be completed 12X24.
If friends talk about Power Supply, then you are going to use two 80A 5v power supplies in this project.
I am going to see you as a very banging project, you can see in the photo above, in this way you have to use Polly Shit.
I have used Ingle to make the gate. You are going to get to see something like this, You can see it in the photo below.
You can see it in the photo above. I have used some such angles. These are of single 2mm and 20fit. After that I want you to cut it. You have to do two pieces of 8 ft and 4 ft. Then you can become good fame. I have cut something like this. You can see it in the photo below.
You have to cut something like this. After that I want you to do the welding.
So friends, now our almost gate welding work is over, now we have to put a policy on this thing. Friends, it is very easy to apply the policy, for this you can use a rivet gun as I did.
Friends, the work that is left for us is the wiring and I will tell you though the video and if I talk about the controller, then I will provide it to you, for more information you can watch our video whose link is given below.
The source is in Hindi: HERE
LEDEdit, LEDEdit-K, LEDEdit Effects, LEDEdit animation, Pixel LED Programming, NeonPlay, LEDEasy, Glediator, Jinx!, LEDBuild, Madrix, T1000s, WS2811.