In today’s article, I am going to talk about How to make Pixel LED Tree With Sound Effects. If you want to make such a wonderful attractive tree on Diwali with Pixel LED, then read this article completely today.
How to Make Pixel LED Tree Parts:
Which part you are going to need first, then we will know what things you have to use first, first of all, you need 4 stells of 4 mm, if you want, you can use for more but now only 4 pieces It is going to be needed, you are going to see something like this, you can see in the photo below, you can see in the photo above, I have used some such 4 mm cells. You have to keep in mind that it should be of the same size because with this you are making your favorite tree. So we first see which part to use. And don’t miss this article a bit.
- A controller is needed which will be easily available for Rs 1000.
- Want SMPS 5v 5a, you will get it for Rs 200.
- special 5 pic Pixel LED which you will get a pic for Rs 350.
- You can use iron rods to make the complete trucker.
- Tai Greep 200 Pic
Pixel LED Tree Wiring:
First of all, you have to install the led with the help of tai in our tractor ready.
After that, parallelize what we have made above and connect it with whatever line is below, then give power to all led, and in the list below you will have to connect the controller.
The work that is left now is to connect the speaker, then whatever you have There is a sound system with amplifier. connect its 3.5 mm jack pin with the controller that’s it now your whole system is ready.
Pixel LED and Controller Purchase:
If you want to buy a console, visit the products section and you will find many of them in all sizes to suit you.
And if you do not understand the post, then the link to the video is given below.
Video Link :
LEDEdit, LEDEdit-K, LEDEdit Effects, LEDEdit animation, Pixel LED Programming, NeonPlay, LEDEasy, Glediator, Jinx!, LEDBuild, Madrix, T1000s, WS2811.