How To Solve Pixel LED Blinking Problem
Share This Post, Help Others

Hello friends, today in this article I will show you How to Solve Pixel LED Blinking Problem? I am going to do this. How come this problem comes? How can you solve this problem in an easy way? I am also going to tell you how you can use Power Supply. and what is the problem of Power Supply with this problem.

How to Solve Pixel LED Blinking Problem?

Friends, I am going to talk to you in detail here, it depends on how you want to use Power Supply, if you have problems in installing power supply, this problem comes with this help. Today I am going to tell you how to use Power Supply.

Friends, it is important to know why this problem comes, you get 50 LEDs in a Pixel LED jailer, and You can series this and install LEDs even further.

Now suppose you have a series of 300 LEDs together like this, And if you give power to it using the power supply from the same side, then you will get to see such problems. You can see in the photo below Seeing your photo, you will understand everything very well.

Solve Pixel LED Blinking Problem

Friends, these Pixel LEDs are operated from 5V. So let’s say you have used 300 Pixel LEDs. And if you have given power from only one side, then they are left with only 3V while going ahead.

You are going to see such problems due to Pixel LED not getting Complete Volt further. if you have a power supply of 60A, then you can operate a lot of Pixel LED with its help, but you will have to use the power supply in another way. I am going to tell you this.

How to Use Power Supply?

Friends, how can you use it by doing more and more Pixel LED LED Series.

How you have to use Power Supply, you can see in the photo below.

PIXEL LED Blinking Problem Solution in Hindi

My Friends, you can see in the photo above that how I have connected it, You will understand everything.

if you operate Pixel LED in series with the help of 60A power supply, then you have to do some kind of connection, you will have to make a power supply connection on each jailer of Pixel LED.

With the help of which all Pixel LEDs have the same current supply. and with the help of which the problem of Blanking is solved. In this, you have to connect something like this.

Overall, you will have to do a separate power supply connection on each controller, If you want to put a lot of pixel LEDs by series together in this way with the help of a single power supply, then you will have to do some kind of Wiring Connect.

Basic Information

Friends, if you supply power at the same place in 300 Pixel LEDs, then you get to see only 3V from 5V in the future. With the help of which you are going to see all these problems. If you will connect the power supply on each side, then you are not going to face any problems.

If you want to install more LEDs then you can connect them with this type, if you want to install many LED lights using the same power supply, then you will have to make a power supply connection on each pixel LED’s net. With the help of this, you will not have to face any problems.

Friends, ledpixeltm I hope you have understood everything in this article today. If you still do not know, then you must tell me by commenting. I will replay you there.

Do not forget to register on our ledpixeltm website to receive all new programs and effects, and we will soon add new effects. If you have a specific size, leave us a comment and we will provide it.

Similar Posts

Leave a Reply

Your email address will not be published.