LED Controller T8000AC 8,192 Pixels
Share This Post, Help Others

T8000 LED Controller 8 Ports 8,192 Pixels Addressable SD Card Pixel Controller AC110V for WS2801 WS2812B WS2811 LPD8806 UCS1903 1914 9883 RGB LED.

About T8000 LED Controller:

  • Support all kinds of light sources of point, line, and surface. Fits regular and irregular shapes of lights project
  • 8,192 pixels led lights and support most led lights with IC Chips
  • Multiple synchronizations featured a 1GB SD card and rainproof dust-proof
  • Support Single wire IC: UCS1912, TM1803, TM1804, TM1809, TM1812, UCS2903, UCS2909, UCS2912, 8205,8206,16703, WS2811 etc
  • Support Double wire IC: MX5109, LPD6803, D705, P9803, MX8109, SM16726, P9813, LPD8806, WS2801, New IC: TM1914, 9883 1904 etc

T8000 LED Controller Description:

Parameter and Feature:

  1. Product name: addressable led controller
  2. Addressable program: Yes
  3. Working Voltage: AC110
  4. Power: 2W
  5. Ports Number: 8PCS
  6. Max Controller Pixels: 8192Pixels, 1024pixels / port
  7. Working Temperature: -30 ~ 85
  8. Product Size: 217 * 185 * 44mm
  9. SD Card Support: Yes
  10. Gross Weight: 1.3KG
  11. Rainproof and dust-proof
  12. Support Multiple synchronizations: Yes
  13. Application: Most led lights with IC Chips
  14. Can control 32-65536 grayscale, Gamma software correcting processing
  15. Support all kinds of light sources of point, line, and surface. Fits for regular and irregular shape of lights project.
  16. Light’s signal will be connected to DAT, clock wire will be connected to CLK, and the negative wire will b single wire and double wire IC type lights, when used for single wire IC types, there is no need to connect to CLK wire.
T8000 LED Controller

Support IC Types:

A.Single wire IC: UCS1912, TM1803, TM1804, TM1809, TM1812, UCS2903, UCS2909, UCS2912, 8205,8206,16703, WS2811 etc.
B.Double wire IC: MX5109, LPD6803, D705,P9803, MX8109, SM16726, P9813, LPD8806, WS2801
C.New IC: TM1914, 9883,1904

Specification of Memory SD card:

  1. Type: SD card(If control much-led lights, the high speed SD card will be recommended)
  2. Memory: 1GB
  3. Format: Support FAT and FAT32
  4. Save Fat: *.led

Operation of a button:

  • SPEED+: Accelerate the playing speed, max speed is S-19
  • SPEED-: Slow down the playing speed, min speed is S-01
  • MODE: Switch to programs
  • SET: Set IC types, choose the current IC type and wait for it automatically save after 8 seconds. Then restart the power.
  • Note: Don’t power off after choosing IC type and program, until wait about 8 second, all the setting is saved automatically.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *